May 28, 2024
which is composed of top control panel, sunshade , dashboard, central console,

Contact us

cooperationlike@gmail.com

The CR929 aircraft cockpit adopts the classic layout design of aircraft on the current route, which is composed of top control panel, sunshade, dashboard, central console, left and right console, pilot and co-pilot seat, observer seat, observer console, ceiling, side panel and cloakroom.

This time we have introduced a number of popular car sunshade umbrellas. I wonder if you have found your favorite car sunshade among them. Every summer, the car at home becomes an amazing oven, which makes it impossible to ride without opening the door to dissipate heat and ventilation, which becomes a big worry when you go out. Although the car sunshade can not keep the temperature in the car as cool as in spring and autumn, it can also effectively reduce the temperature and keep it within a tolerable range. Coupled with the fact that the price is not expensive, it can be said to be a necessary automotive product for all families with cars.

The optimum temperature for strawberry seedling growth was 25 ℃ ~ 30 ℃, and the stolon stopped growing when it exceeded 32 ℃. Therefore, in the early stage, the greenhouse should do a good job of heat preservation, improve the air temperature and substrate temperature, and promote the early emergence of stolons. In the southern region, the temperature from mid-May to early July is suitable for the occurrence of stolons, during which the number of stolons is large and the interval between stolons is short. From mid-July to August, with high light intensity and high temperature, the greenhouse should be covered with a sunshade net with a shading rate of 60% from 9 am to 5 pm every day, so as to reduce the temperature and ensure the normal growth of mother and offspring. In addition, moderate shading in the later stage of seedling cultivation can meet the low temperature and short day conditions needed for strawberry flower bud differentiation and promote strawberry flower bud differentiation.

The interior of ② softens. There is no bulge on the surface of various devices in the car cockpit, the material is soft and elastic, and the sharp corners, protruding edges and protruding parts can be reduced as much as possible, which can reduce the injury suffered by the passengers in the event of collision. The range of interior softening includes prominent accessories such as steering wheel, dashboard, side circumference, roof, seat, floor and sunshade. The steering wheel of some cars can contract during a collision, and some seats have headrest to prevent head injury when the rear is hit.

With the passage of time, EVA foam is widely used in electronic appliances, pearl cotton instruments, computers, audio, equipment, industrial control chassis, hardware lighting, handicrafts, glass, ceramics, home appliances, spraying, furniture, alcohol and resin and other high-grade fragile gifts, hardware products, toys, melons and fruits, leather shoes, daily necessities and other sold goods. In addition, EVA foam is characterized by excellent anti-infrared ultraviolet ability and is the primary sunshade product. It has a good anti-skid and shock absorption effect. It has many advantages, such as waterproof and moistureproof, shockproof, sound insulation, thermal insulation, good plasticity, strong toughness, recycling, environmental protection, strong crashworthiness and so on.

Therefore, broken bridge aluminum doors and windows are widely used in office, factory, refrigeration, laboratory, instrumentation, factory buildings and other general doors and windows (heat insulated windows, dry windows and open windows are widely used). Factory doors and windows use steel doors or wooden doors as one of the main materials for fixing doors and windows. People come into contact with sawed doors and sawed doors. Saw door is the abbreviation of building door and window, and the general name of saw door is saw door head. Saw door is an important form used as window in ancient times, which is mainly used to hide the thermal insulation of large sunshade, TV cabinet and door.

China stipulated on October 1, 2007, “the visible light transmittance of the front windshield is not allowed to be less than 70%, and the side window glass is not allowed to post mirror reflective sunshade film.” But in real life, there are often many car owners in order to save money, choose to paste a cheap high imitation film in the automobile supplies wholesale market or roadside shop, but do not realize that this kind of inferior film, not only can not work, but also because it contains formaldehyde, benzene and other harmful ingredients to release harmful substances to the car, damage to the health of passengers, less than two years will fade, but also need secondary film, secondary consumption of

which is composed of top control panel, sunshade , dashboard, central console,

Some car owners park their cars outside in the wind and rain. The front gear, rear gear and windows on both sides of the car are made of glass. The summer sun shines into the car through the glass, which will soon raise the temperature inside the car. Then we can give our car “sunscreen”, that is, we can use car sunshade to block the sun in all directions, so that the light can not enter the car, which can reduce the temperature in the car to a certain extent. it can also prevent leather seats and dashboards from being damaged by ultraviolet rays. Second, driving is not afraid of hot

Architects attach great importance to the physical environment of academic buildings. The whole building is almost completely wrapped in glass curtain walls, ensuring transparency and interactive experience, while introducing daylight for daily work and research, and the space that does not need daylight is located in the middle of the building, reasonable functional distribution and effective use of natural light reduces the energy consumption caused by artificial light sources. Architects deal with the building shell in an ingenious and innovative way, using double-layer low-iron toughened glass and mechanical sunshades with a total thickness of 41 cm for mechanical ventilation to isolate subway noise and create a quiet learning environment. at the same time, a thermal buffer zone outside the building is formed, which further improves the comfort of the internal environment.

As can be seen from the above picture, through horizontal shading, a certain direct area can be reduced on the outer window, which makes the radiation heat to the building caused by the heat of the outer window (red wave arrow part). At the same time, through the upper reflective surface of the sunshade, the sunlight is reflected to the ceiling of the building, and then through the diffuse reflection of the ceiling, the daylighting inside the building is increased (orange wave arrow part). It should be noted that this part of the reflected light also brings part of the energy into the room, which will cause indoor load, but the heat of reflected radiation can be reduced by using selective reflection coating, therefore, the heat caused by this part of solar reflected radiation can be considered to be much less than that caused by direct sunlight.

Humanized design simple mediocre Fumei interior design adopts innovative integrated center console and three-curved integrated center console. Fumelai adopts white background dashboard, instrument gear display function and digital two-position odometer and instrument panel two-color design, which makes it easy to grasp the driving state while driving and make the driving vehicle safer and more convenient. The configuration of left and right sunshade with double-illuminated cosmetic mirror, double-layer central armrest box, anti-dazzling inner rearview mirror, aircraft-type rear seat bag, stainless steel cold light welcome pedal, and rear window sunshade curtain all show the humanized characteristics of Fumirai.